Introducing Diode Dynamics Elite Series fog lights are a great upgrade over your dulled out or weak fog lights.
Elite Series Fog Lamps: the first OE-style fog lights that were designed for true performance. With a custom-engineered patent-pending optic, multi-die automotive emitters, and high-power full-copper circuit boards, the Elite Series fog light delivers up to 5 times more output than halogen lamps. Highly engineered single-piece PMMA lens. This optic was carefully designed using advanced optical simulation software to produce a light pattern that is wider than any other aftermarket fog lamp on the market, with an 80-degree spread of highly intense light. Even with this extremely wide band of light, the pattern is extremely smooth throughout, with an extremely sharp cutoff to avoid glare to other drivers.
Lights offer two colors for your needs. Either 6000K cool white or 3000K yellow. Both options offer yellow back light. Fog light are SAE approved and IP68 waterproof. While back with an eight-year warranty. So, no need to worry about a light that will not last you. Diode Dynamics has put a lot of research into these lights from preformance to installation. The fogs are a simple remove OE ones and mount Diode Dynamics into the same spot. So, no need to cut or modify. Wiring is also a breeze simple plug and play design.
So, if you're looking to make a change to your OE fog lights. Order a set of Diode Dynamics Elite Series Fog Lights today!
Diode Dynamics Elite series fog lights are a direct replacement of OEM lights. Making the install a very easy and straight forward install. But if you find yourself in need of help. Please reach out to our tech support they would be happy to help and point you in the right direction.
Diode Dynamics carries a 3-year limited warranty on all products, for manufacturing defects or functional product failure. For approved warranty claims, Diode Dynamics will replace the defective product with the same product or, if it has been discontinued, one comparable in performance and value. See exceptions and limitations below.
If you have an issue with any product, we will diagnose the issue with you, and you may be required to answer questions or assist in the diagnosis. If Diode Dynamics determines that your product is defective in material or workmanship, Diode Dynamics will issue an RMA number. An RMA number must be issued before any items are returned.
U.S. Customers: All initial shipping costs are covered by Diode Dynamics. In most cases, you will immediately receive the new products with a return label. However, in some cases, you may need to use a provided return label to send back items first. Diode Dynamics will provide one free return label per order. You may return any number of items from the order in one box using the free shipping label. However, you will be responsible for return shipping costs for any other separate returns from the same order.
International Customers: For all warranty orders over $200, defective products must be returned before a replacement can be sent. You are responsible for return shipping costs for all warranty orders over $200. If you are required to ship your item back for warranty purposes, Diode Dynamics will cover shipping costs for the replacement order. All warranty orders valued under $200 will be replaced immediately, and you will be responsible for the shipping costs of the replacement.
After 3 years of Replacement Limited Warranty, Diode Dynamics will continue to warrant for 5 additional years that select products are free of manufacturing defects. This provides Limited Warranty coverage for a total of 8 years from when the product was purchased. See exceptions and limitations below.
These products must be returned at the customer's expense to Diode Dynamics, for inspection, and will be replaced or repaired, at the sole discretion of Diode Dynamics. Shipping back to the customer will be covered by Diode Dynamics.
Exceptions, Limitations, and Stipulations
Components: If a problem exists with a single component, Diode Dynamics may replace only the component needed to restore function.
Warranty Timing: All schedules are based on the number of days between original purchase date and receipt of RMA information by Diode Dynamics. All warranties are non-transferable. Warranty terms, policies, and limitations are subject to change without notice.
Surface Finish: Many Diode Dynamics products feature treated surfaces, with paint, powdercoating, anodization, UV coating, etc. These coatings, while durable, are not designed to last indefinitely, and wear out over time depending on use. To prolong lifespan, we recommend that products are shielded from UV light when possible, cleaned regularly using mild detergents, and that they are not subjected to abrasives or damage. Surface finishes that wear out from regular wear and tear are not covered under warranty. If damage in coatings appears within the initial 3 Year Replacement Limited Warranty, and is determined to be caused by manufacturing defect, it will be covered or repaired. Surface finish issues are not covered under the 8 Year Limited Warranty, for any reason.
Condensation: Certain products from Diode Dynamics contain sealed volumes of air. High-power LEDs create a large amount of heat, so the air expands and contracts as the lamp heats up and cools down. Pressure-equalizing vents are used whenever possible to prevent damage to the seal of the lamp, but this can occasionally introduce moisture in the air, especially with high humidity. Under certain circumstances, condensation may collect on the outside lens of the product, as it is much cooler than the rest of the lamp. This condensation is normal, and not covered under warranty. Condensation can be removed by allowing the lamp to fully warm up, or reducing outside humidity. If moisture buildup becomes greater than simple condensation, this indicates an issue with the product seal, and Diode Dynamics will cover it under warranty, in its sole determination. When making warranty claims for moisture buildup, we encourage you to include photographs showing the extent of the moisture.
Installation and Labor: Diode Dynamics product warranties are limited to coverage of products only. Diode Dynamics does not warranty or offer compensation or coverage of installation labor or time that may be required for replacement of warranty items. We strongly encourage customers to contact us prior to seeking outside assistance in diagnosis of any product issue.
All warranties, expressed or implied, are void if our warranty claim department determines that there is sufficient evidence of one or more of the following:
Negligence: Improper installation or improper use, including using or installing any product in a manner not specified by Diode Dynamics, or damage caused by improper installation.
Abuse: Damage beyond the limits of "normal wear and tear."
Product Modifications or Repair: See below.
Unauthorized Dealer Purchase: Purchase of items through any unauthorized party. We encourage you to contact Diode Dynamics prior to purchase to verify the seller is authorized.