Free Shipping on Orders $100+
Build Your Truck in 3D with RealTruck Builder
RealTruck SwingCase Truck Bed Toolbox
Features
WEATHERTIGHT, LOCKABLE STORAGE RIGHT WHERE YOU NEED IT
- BUILT AS TOUGH AS YOUR TRUCK: Constructed from an impact‑resistant ABS composite, SwingCase is designed to withstand daily wear and protect against cracks and impacts, helping safeguard your stored gear mile after mile.
- BUILT‑IN SECURITY YOU CAN TRUST: The integrated key-lockable rotary handle protects stored gear and helps prevent theft, giving you confidence and peace of mind whether at the job site, a trailhead, or running errands around town.
- GEAR STAYS SAFE AND DRY: Engineered with a weathertight seal to block out moisture, dust, and debris, so your cargo stays protected in any weather.
- DESIGNED FOR EFFORTLESS ACCESS: With a simple, accessible lever release, the SwingCase swings out smoothly for quick access to your gear, then locks back against the bed wall, helping keep cargo space open and organized.
- PERFECTLY PORTABLE FOR FULL BED ACCESS: The SwingCase removes quickly and easily, giving you full use of your truck bed when needed. Just lift the box off the hinge to take your tools and gear with you.
- STRONG AND SPACIOUS STORAGE: With 1.5 cubic feet of storage and a 75 lbs weight capacity, SwingCase easily handles more of your gear. From hand tools and recovery gear to all your camping essentials—everything stores neatly out of the way.
- EASY INSTALL: Quick and easy installation in less than 30 minutes using the provided hardware (select applications may require minimal drilling).
- HASSLE-FREE WARRANTY: 1-year warranty supported by dedicated product experts and customer service team based in the USA.
Description
Conventional toolboxes often consume valuable truck bed space, cutting usable length by as much as two feet. The RealTruck® SwingCase® truck bed toolbox offers a smarter solution, utilizing the typically wasted space between the rear wheel well and the tailgate. That’s weathertight, lockable storage right where you need it. Each SwingCase provides 1.5 cubic feet of storage and up to 75 lbs. of weight capacity, allowing you to carry more of your gear without sacrificing bed length or minimum width.
The SwingCase is built as tough as your truck. Constructed from impact-resistant ABS composite, SwingCase is designed to withstand daily wear and protect against cracks and impacts. With a simple, accessible lever release, the SwingCase swings out smoothly over the tailgate, giving you quick and easy access to your gear. When full bed access is needed, the SwingCase can be removed quickly and easily. The removable design doubles as convenient tool transportation, so you can carry your tools to the jobsite or the front of your truck for a quick roadside repair.
While the SwingCase is frequently installed beneath a RealTruck tonneau cover, these unique toolboxes are fully capable of standing up to the elements on their own. A weathertight lid seal blocks dust, dirt, and moisture, while the key-lockable rotary handle protects stored gear and helps prevent theft.
The RealTruck SwingCase features quick, easy installation in less than 30 minutes with the provided hardware—select applications may require drilling. RealTruck backs each SwingCase with a 1-year warranty supported by dedicated product experts and a customer service team based in the USA.
PRODUCT HIGHLIGHTS
- 1.5 cubic feet of storage
- 75 lbs. weight capacity
- Rugged ABS composite construction
- Weathertight lid seal
- Key-lockable rotary handle
- Outer dimensions: upper case 29-in. L, lower case 15-in. L, 8-in. W
- Inner dimensions: 15-in. max depth, 8-in. min depth
- Creates storage space in a frequently unused part of the bed
- Keep clutter and small items out of your bed
- Easy to remove and reinstall when extra bed space is needed
- Quick installation in under 30 minutes—select applications require minimal drilling
- 1-year warranty supported by dedicated product experts and a customer service team based in the USA
Installation
INSTALLATION TIME 30 mins or less
INSTALLATION DIFFICULTY Level 1: Simple Installation
INSTALLATION OVERVIEW The RealTruck SwingCase truck bed toolbox installs in under 30 minutes. Some drilling is required for select applications. All required hardware is included. For additional assistance, check out our video installation guides or call the experts.
Get It Installed
Warranty
TERMS OF THIS WARRANTY The manufacturer warrants that the ABS polymer structure of your SwingCase will be structurally free from defects in material and workmanship for (1) one year from the retail date of purchase. The lock, hinges, and hardware are warranted to be free from defects in material and workmanship for (1) one year from the retail date of purchase. This warranty applies only to the original purchaser and is nontransferable. Your original sales receipt will serve as proof of purchase for this warranty. Be sure to retain your receipt for your proof of purchase date. Before credit can be issued on a warranty claim, proof of defect may be required. This can be determined at the time of the claim.
EXCLUSIONS OF THIS WARRANTY Not covered under this warranty is failure due to neglect, improper installation, including any modifications to installation hardware, alterations, addition of equipment, abuse, accident, weather related damage, exposure to chemicals that are not labeled “safe for plastics”, and normal wear from lack of maintenance.
CAUTION Always read the ingredients of any product you are using to clean your SwingCase. Make sure that you use only products that are safe for use with plastics. Many chemicals contain material that will permanently discolor your SwingCase. This is not considered a manufacturer defect.
OWNER RESPONSIBILITIES Incidental or consequential damage or loss of contents due to use, neglect, lack of maintenance, misuse, or abuse of the SwingCase is the sole responsibility of the truck owner and operator. Paint damage to your truck is not covered under this warranty. When operating your truck always keep the SwingCase in the stowed position with the lid closed and latched.
REPAIR AND REPLACEMENT In the event that your SwingCase is found to be defective under the terms of this warranty, it is at the manufacturers discretion to repair or replace the defective part. All repairs must be made by an authorized SwingCase dealer or under the direction by the factory. In the case of either event, we are not responsible for any transportation costs associated with the warranted claim.
WARRANTY REGISTRATION Warranty registration must be on file and/or proof of original purchase (detailed and dated receipt) required for warranty to be effective.
For complete warranty details, please visit:
www.realtruck.com/warranty-policies