TRUKD 12.5 Inch Bed Rack
 | Made in the USA |
- description
- install
- reviews
- Q&A
description
- Includes: four uprights, four bar attachments, two crossbars, bed attachment clamps (if needed), and one bag of hardware
- Works well with rollup tonneau covers
- Adjustable from 6.5 inches to 12.5 inches
- Extra crossbars can be added for additional storage
- Made of ten gauge steel & aluminum
- Finish is a textured black powder coat
- Load rating: driving load is 250 pounds for a set; parked load 1000 pounds for the set
- Two year Warranty
- Made in the USA
The TRUKD 12.5 Inch Truck Bed Rack is designed to get you and your things where you want to go. This rack is designed to work with many items including: tents, snowboards, bikes and more! If you want a rack that can carry your tent below the roofline- the 12.5 inch TRUKD Rack works exceptionally. This rack works well with roll up tonneau covers, so get TRUKD with the TRUKD 12.5 Inch Truck Bed Rack.
| Brand | TRUKD |
| Warranty | 2 Year Limited Warranty |
| MADE IN AMERICA | Yes |
install
Make sure your received everything in the correct quantities for installation:
4 Upright Brackets (6.5" or 12.5")
4 Faceplates (6.5" or 12.5")
4 Bar Brackets
4 Bed Clamps (truck models without bed side utility rails)
8 Utility Rail T-nuts (truck models with bed side utility rails)
2 Cross Bars
Bag 1 - Bolts
8x ? - 16 bolts
Bag 2A - Screws and Washers
16 1/4-20 x ?" screws and washers
Bag 3 - Screws and Washers (Upright to Bar Bracket)
8 3/8-16 x 1" screws
8 large shoulder washers
8 small shoulder washers
Bag 4A - T-nuts and screws (Crossbar to bar brackets)
24 t-nuts
24 ΒΌ -20 x .5"screws
1 tube of blue thread locker
Tools Required:
Measuring Tape
Hex Drivers (4 Sizes)
Socket Wrench Set
*we do not recommend using power tools for this installation
PRE INSTALL NOTES: You will likely need to remove your Tonneau cover to attach the brackets in step 4. After the brackets are installed and in position you will need to reinstall your Tonneau cover before attaching the crossbars. Racks with bedside rails must be removed and depending on placement of the uprights, others may need to be removed as well.