Get up to $400 Off Truck Bed Covers – Shop Now
If you are looking for a better way to secure and organize your tactical gear and supplies, then look no further then the Ruff Tuff Flex OPS™ Package! The Flex OPS™ is a storage and organization system designed for use in vehicles with adjustable headrests. It comes in a set of 2 units for the driver and passenger side. Flex OPS™ attaches to the support posts of the seat’s headrest and hangs behind the seat. It uses an adjustable strap to secure fully against the seat back. Use the Flex OPS™ units individually or as a pair, for a wide variety of storage options. It is available in black and is constructed from a dura EZ-care fabric that is extremely durable. The Flex OPS™ is the ultimate seat back organization and storage solution that can be used for firearms, crossbows, fishing rods, laptops or tablets, outdoor gear, tools, and much more!
Each Flex OPS™ unit includes 2 smaller top opening pockets (15" x 11.75"), 1 large open pocket (13.5" x 9"), and a side-opening pocket that opens from each end (15" x 11.75"). The 2 smaller pockets have a closing flap for general storage while the 2-sided opening pocket can be used to suspend long items horizontally between the two neighboring seats. The overall size of the unit is 17.5" x 26" and it has a solid protective backing for extra durability. In addition to the many pockets, each unit has 3 rows of MOLLE webbing as well as a 2" strip of hook and loop fastener (loop side). This gives you the capability of mounting many MOLLE compatible pouches and accessories, so you can really make it your own. There is also an adjustable top strap with a side-release buckle for securing the upper end of a rifle or crossbow, if you have it vertically. Installation of the Flex OPS™ is a breeze and it can easily be moved from vehicle to vehicle. There are two ways of attaching it to accommodate both removable and non-removable headrests. It is backed by a 1-year warranty.
So, whether you are in need of a versatile tactical seat back organizer for work or play, get the Ruff Tuff Flex OPS™ Package today!
The Flex OPS™ is intended for installation only on seats with adjustable headrests. There are two ways of attaching it to accommodate both removable and non-removable headrests. Before installation, identify which Flex OPS™ unit is for the driver side, and which is for the passenger side. Near the top of the Flex OPS™, just above the logo tag, is a nylon strap with a side-release buckle. The Flex OPS™ should be installed so this buckle is on the inside edge of the seat. If you have removable headrests, the Flex OPS™ unit requires you to briefly remove your headrest from the seat. Most seats have a small button on one of the post holes which must be pressed to allow for removal of the headrest. Place the Flex OPS™ unit over the top of the seat and position the large slots to line up with the seat's headrest post holes. Holding the Flex OPS™ unit in position, re-insert your headrest back into the seat. Locate the long strap at the bottom of the Flex OPS™ unit and run this strap around the base of the seat back and secure using the side-release buckle. For more information, please reference the install guide and video below.
Ruff Tuff Products warrants its products against defects in workmanship and material for one (1) year from the shipping date. Ruff Tuff does not warrant against color change or fading. This warranty is limited to repair and replacement only. Ruff Tuff’s liability shall not exceed the replacement or repair cost of the merchandise. The product may be repaired or replaced for credit at Ruff Tuff’s discretion.