The Diode Dynamics SS5 Selectable Backlit LED Cube Lights is amongst the brightest on the market, due in large parts to its TIR optics (Total Internal Reflection). The TIR collects all of the light from the LED and redirects it where you need it, thus reducing glare and improving total light output.
This light bar comes in two models, ensuring a solution that best-fits your budget. The Sport series model uses nine Luxeon Z ES high-intensity LEDs for 40 watts of total power. The Pro series model steps things up, with nine Cree XP-L HI high-intensity LEDs and over double the total power at 90 watts.
Choose between one of four beam patterns: spot, fog, combo and driving. The spot beam is a the brightest and can shine a straight beam up to a mile away. The flood beam is designed to provide even light with a full 70" x 55" degree spread. The driving beam is great for general lighting at speed, and the combo beam combines both the driving and flood beams. Another feature is the selectable backlight; choose from eight different colors such as blue, red, teal, amber, green, purple, yellow and white with a flick of a switch. These lights comes with everything you required to complete installation.
If you're looking to light up the night, look no further than the Diode Dynamics SS5 Selectable Backlit LED Cube Lights.
After 3 years of Replacement Limited Warranty, Diode Dynamics will continue to warrant for 5 additional years that select products are free of manufacturing defects. This provides Limited Warranty coverage for a total of 8 years from when the product was purchased. See exceptions and limitations below.
These products must be returned at the customer's expense to Diode Dynamics, for inspection, and will be replaced or repaired, at the sole discretion of Diode Dynamics. Shipping back to the customer will be covered by Diode Dynamics
Exceptions, Limitations, and Stipulations
Components: If a problem exists with a single component, Diode Dynamics may replace only the component needed to restore function.
Warranty Timing: All schedules are based on the number of days between original purchase date and receipt of RMA information by Diode Dynamics. All warranties are non-transferable. Warranty terms, policies, and limitations are subject to change without notice.
Surface Finish: Many Diode Dynamics products feature treated surfaces, with paint, powdercoating, anodization, UV coating, etc. These coatings, while durable, are not designed to last indefinitely, and wear out over time depending on use. To prolong lifespan, we recommend that products are shielded from UV light when possible, cleaned regularly using mild detergents, and that they are not subjected to abrasives or damage. Surface finishes that wear out from regular wear and tear are not covered under warranty. If damage in coatings appears within the initial 3 Year Replacement Limited Warranty, and is determined to be caused by manufacturing defect, it will be covered or repaired. Surface finish issues are not covered under the 8 Year Limited Warranty, for any reason.
Condensation: Certain products from Diode Dynamics contain sealed volumes of air. High-power LEDs create a large amount of heat, so the air expands and contracts as the lamp heats up and cools down. Pressure-equalizing vents are used whenever possible to prevent damage to the seal of the lamp, but this can occasionally introduce moisture in the air, especially with high humidity. Under certain circumstances, condensation may collect on the outside lens of the product, as it is much cooler than the rest of the lamp. This condensation is normal, and not covered under warranty. Condensation can be removed by allowing the lamp to fully warm up, or reducing outside humidity. If moisture buildup becomes greater than simple condensation, this indicates an issue with the product seal, and Diode Dynamics will cover it under warranty, in its sole determination. When making warranty claims for moisture buildup, we encourage you to include photographs showing the extent of the moisture.
Installation and Labor: Diode Dynamics product warranties are limited to coverage of products only. Diode Dynamics does not warranty or offer compensation or coverage of installation labor or time that may be required for replacement of warranty items. We strongly encourage customers to contact us prior to seeking outside assistance in diagnosis of any product issue.
All warranties, expressed or implied, are void if our warranty claim department determines that there is sufficient evidence of one or more of the following:
Negligence: Improper installation or improper use, including using or installing any product in a manner not specified by Diode Dynamics, or damage caused by improper installation.
Abuse: Damage beyond the limits of "normal wear and tear."
Product Modifications or Repair: See below.
We understand that some products may be modified in the course of installation or use by the customer to suit a particular need. However, opening, disassembling, cutting wires, attempting repair, or otherwise modifying any product in a manner not specified by Diode Dynamics will void the product warranty, subject to the exclusions below.
For modifications to wiring, electrical components, or connectors, our staff will assist as possible, but is trained to support problems that arise in the course of standard use, without modification. Product instructions and installation guidance should be followed as written, and products should not be modified.
Exclusions: Replacing lenses on serviceable lamps, such as Stage Series LEDs, will void the 3-year limited replacement warranty. However, the 8-year limited warranty will be upheld and in effect. In the case of moisture intrusion for serviceable lamps, you may be required to open and re-seal the lamp yourself. If issues persist, we may require that the lightbar or LED pod is returned for repair under the 8 Year Limited Warranty