Free Shipping on orders over $100
- Top
- description
- install
- warranty
- reviews
- Q&A
description
- Winch-compatible, prerunner-style front bumper
- Heavy-duty 3/16-in. plate steel construction
- Textured black powder coat finish
- Accepts up to 10,000-lbs. winches (sold separately)
- Features cutout for 20-in. double-row LED light bar (sold separately)
- Some cutting and modifications are required
- Includes vehicle-specific mounting kit
- License plate relocation bracket included
- High-clearance design promotes clearance
- Retains factory skid plate
- Welded D-ring shackle lugs
- Limited lifetime structural | 3-year finish warranty
Beef up your Tacoma, 4Runner, or Subaru's front end with the Body Armor 4x4 HiLine Series Front Bumper. This rugged, modular front bumper works in conjunction with your vehicle's factory equipment, boosting impact resistance and accessory mounting provisions while retaining its sleek, factory-inspired aesthetics. Rather than replacing the entire front bumper with a burly plate or tubular steel counterpart, the Body Armor 4x4 HiLine Series Front Bumper takes a “less is more" approach, replacing only the bumper's center section for added protection without overpowering the natural design of the vehicle.
However, don't mistake the HiLine's low-profile form factor for a lack of durability or features. Fabricated from heavy-duty 3/16-in. plate steel, the HiLine offers outstanding strength and rigidity. A tubular push bar provides additional impact protection and—depending on the application—integrated light mounting tabs for auxiliary lighting. Wedged into the bumper's body is a heavy-duty, ¼-in. thick plate steel winch plate, accepting up to 10,000-lb. capacity winches. Body Armor 4x4 finishes each HiLine bumper in a stealthy textured black powder coat, guarding against rust and corrosion.
Regarding accessory provisions, the Body Armor 4x4 HiLine demonstrates several. A recessed cutout houses most 20-in. double-row LED light bars, boosting visibility in low-light conditions. Welded D-ring shackle lugs provide stout recovery points, easing recovery efforts during trail use. Other features include a license plate relocation bracket and provisions for factory skid plates and underbody protection.
Installing the Body Armor 4x4 HiLine is relatively straightforward—however, some cutting and trimming of the factory bumper and bumper cover is required. Body Armor 4x4 includes all necessary hardware and thorough installation instructions with each order for hassle-free at-home mounting.
Body Armor 4x4 has a reputation for reliability, and the HiLine Series Front Bumper is no exception. This product comes backed by a limited lifetime structural warranty and a 3-year finish warranty, ensuring years of reliable service. Order yours today for exceptional protection and factory-inspired styling.
| Brand | Body Armor |
| Finish | Textured Matte Black |
| Warranty | Limited Lifetime (Structural) 3 Year (Finish) |
| Material | 7 Gauge Steel |
install
The Body Armor 4x4 HiLine Series Front Bumper features a simple bolt-on installation. However, some cutting and trimming of the factory bumper is required. Body Armor includes all necessary bracketry and hardware for hassle-free mounting. Still, we recommend having an extra set of hands to offset the bumper's weight.
For additional assistance, contact the experts and check out our video installation guides.
warranty
LIMITED LIFETIME WARRANTY
Body Armor 4x4 (BA) warrants to the original purchaser that these products will be free from defects in material and workmanship prior to shipping and/or installation for the life of the product. This non-transferable limited lifetime warranty does not cover damage or impairment in any part due to misuse, improper installation, accident or contact with on-road or off-road hazards, product modification, improper or inadequate cleaning and/or maintenance. All other warranties and representations express or implied are hereby disclaimed, including fitness for merchantability and buyer's intended use or purpose.
BA products are built and sold for highway and off-road use. The original purchaser assumes all risks as to the selection, suitability and performance of all goods and products purchased. BA's sole and exclusive obligation
under this warranty shall be to repair or replace the item(s) and their discretion and BA will not issue any credit or refund to the consumer. Proof of purchase is required on all warranty claims. BA may require pictures to diagnose the warranty claim and may require the product(s) be returned if determined by BA to be necessary. If a return is required then a RGA number will be issued by BA. Any item arriving to BA without a valid RGA number will be refused and sent back. Upon evaluating the RGA and no valid warranty claim is made, the RGA will be returned to the consumer at their expense or disposed by BA after 60 days. BA will not be responsible for incidental charges such as removal, installation, shipping costs or lost during transit. Any items that are ordered in error, refused or cancelled are not considered a valid warranty claim and cannot be returned to BA.
3-YEAR FINISH WARRANTY
The finish is warranted to be free of defects for a period of 3 years from date of purchase. Product(s) that have been abused, altered, incorrectly installed or used in competition are void of said warranty. Surface rust, pitting or discoloration is a direct result of improper maintenance is not covered by this warranty. It is the responsibility of the owner to preserve and maintain the finish of their product(s). In areas where high concentrations of road salts and other corrosive agents are used, rust or damage to the finish may occur if BA product(s) are not properly maintained. Lack of proper maintenance in these areas may void the finish warranty. See below for routine maintenance tips and recommendations.
PRODUCT CARE AND MAINTENANCE
- Textured coat finished should be cleaned ONLY with a mild soup on a damp sponge.
- BA recommends wiping down the product with a light coat of lubricate (i.e. WD40) periodically to maintain its luster.
- DO NOT apply polish or wax that requires buffing for removal as this may damage the finish.
- DO NOT coat the product with any type of shine such as Tire Shire or glossy aerosol or gel. This can cause discoloration, staining or bubbling.