Spring Savings - Up to $300 Off! Shop Deals
Truxedo Pro X15 TS Soft Roll-Up Tonneau Cover w/ T-Slot Rails
Features
THE WORLD’S ONLY SOFT COVER BUILT FOR TRUCK RACKS
BUILT-IN RACK COMPATIBILITY
- Integrated T-slot rails connect easily with racks, cargo holders, tents, and more for a full upfit.
NO-FLAP 5-LAYER RTxTECHWEAVE
- Textured 120-grade RTxTechWeave™ with 5-layer composite stretches tighter than other materials to eliminate flapping for a quiet ride.
LOWER PROFILE MINIMIZES WIND DRAG
- Specially designed 15-degree side rails position the cover nearly flush to the bed rails—33% lower profile than Lo Pro—reducing flapping and wind noise.
QUIET RIDE FOR LIFE
- We invented the DriveTight™ tension control system to provide an always-tight, no-flutter fit with no need for manual adjustments for the life of the cover.
PATENTED RTxGRIP™ STAYS CLOSED
- Patented RTxGrip™ multi-tiered hook-and-loop holds on strong and stays closed in all conditions.
STRONGER CROSS-FRAMES THAN CHEAP IMPORTS
- Exclusive aluminum cross-frame reinforcements prevents sagging under rain, hail, and snow.
HASSLE-FREE WARRANTY
- Limited Lifetime Warranty supported by dedicated product experts and customer service team based in the USA.
INSTALL IN UNDER 30 MINUTES
- Quick and easy one-person install in under 30 minutes with minimal tools required.
Description
The RealTruck TruXedo® Pro X15 TS is the world’s only soft cover built for truck racks—delivering premium roll-up performance with built-in rack compatibility. Integrated T-slot rails accept racks, cargo holders, tents, and more, giving you the freedom to haul gear above the bed while securing your valuables below.
At its core is the no-flap 5-layer RTxTechWeave™ overlay. The textured 120-grade composite stretches tighter than traditional materials, eliminating flapping while driving. Specially engineered 15-degree side rails position the cover nearly flush with the bed rails for a fitment that’s approximately 33 percent lower profile than the similar Lo Pro.
For the quietest ride, RealTruck’s all-new DriveTight™ tension control system provides an always-tight, adjustment-free, no-flutter fit. The patented RTxGrip™ multi-tiered hook-and-loop holds on strong and stays closed in all conditions. On the underside of the cover, premium aluminum cross-frame reinforcements are stronger than cheap imports and prevent sagging in all weather conditions.
Open the cover with one finger using the easy-to-use trigger latch. The cover rolls tight, stays straight, and looks sleek open or closed. When full bed access is needed, the cover’s quick-release handle enables tool-free removal in seconds.
Installation is quick and easy in under 30 minutes with a clamp-on, no-drill system. From Alaska to Florida, the Pro X15 TS has been tested in the harshest conditions. From -40º to 180ºF and zero to 30 percent humidity, there’s no climate this bed cover can’t handle. RealTruck proudly assembles the TruXedo Pro X15 TS in the USA and backs each order with a limited lifetime warranty.
PRODUCT HIGHLIGHTS
- The world’s only soft cover built for truck racks
- Integrated T-slot rails for rack and cargo system compatibility
- No-flap 5-layer RTxTechWeave™ construction
- X15 15-degree side rails deliver 33% lower profile than Lo Pro
- DriveTight™ tension control system—always tight, no manual adjustments
- Patented RTxGrip™ multi-tiered hook-and-loop closure
- Exclusive aluminum cross-frame reinforcements prevent sagging
- One-finger trigger latch operation
- Rolls tight and true with stay-straight controls
- Patented quick-release handle for tool-free removal
- Clamp-on, no-drill installation in under 30 minutes
- Assembled in the USA
- Limited lifetime warranty
Installation
INSTALLATION TIME
Less than 1 hour
INSTALLATION DIFFICULTY
LEVEL 1: Simple Installation
INSTALLATION OVERVIEW
The TruXedo Pro X15 TS features a simple clamp-on installation that requires no cutting, drilling, or modifications. Installation takes under 30 minutes, and removal is even faster with the integrated quick-release handle for tool-free removal in seconds.
For installation tips and tricks, contact the experts and check out our comprehensive install guides.
Get It Installed
Warranty
LIMITED LIFETIME WARRANTY
WARRANTY COVERAGE This truck bed cover is warrantied against defects in materials or workmanship as follows. This warranty is void if the product has been damaged in an accident, or due to neglect, unforeseeable use, improper installation, improper servicing, or other cause not arising out of defects in material or workmanship.
LIMITED LIFETIME WARRANTY ON HARD PARTS All hardware included with your truck bed cover, including rails, clamps and bows carry a limited lifetime warranty, subject to the terms below.
LIMITED LIFETIME WARRANTY FOR FABRIC The fabric on your truck bed cover carries a limited lifetime warranty, subject to the terms below.
WARRANTY IS NOT TRANSFERABLE The warranty is to the initial consumer purchasing the truck bed cover and it is not transferrable to a subsequent end user. Proof of purchase may be required to enforce these warranty rights.
WARRANTY CONDITIONS Failure to follow these warnings and care instructions will void the warranty:
- Clean with mild automotive soap and water only.
- Do not use conditioners that contain silicone or petroleum.
- The tonneau cover must be secured at all points when the vehicle is in motion. When not fully closed with the rear latch engaged the cover must be completely rolled up and secured at the cab with both provided retainer straps attached. Do NOT drive with the bed cover in a partially open position.
- Cargo should not contact the tarp at any point. Protrusions in the tarp will stress the fabric. Cargo may also shift while traveling causing it to press against the fabric and damage it.
- Check rail clamps for tightness after a week of driving following the installation of the cover and periodically thereafter.
- Do NOT roll the cover into the rear cab window. Do NOT stow the cover against the cab of the truck.
- If the cover is going to be rolled open for an extended amount of time, periodically re-roll the cover and secure the retainer straps to ensure the cover doesn’t rest against the cab of the truck.
- Before opening, the cover must be free of all foreign materials including snow and ice.
- Do NOT tow your vehicle from the rear with the cover on your vehicle. If towing from the rear is required, the cover MUST be removed from the vehicle and properly stored.
WARRANTY PERFORMANCE If all warranty conditions are met, a defective truck bed cover, tarp, or hardware component will either be repaired or replaced (at our option). We reserve the right, for any warranty, to substitute a newer model of bed cover having similar form and function, to offer a warranty discount on an entire replacement system, and/or provide remedies other than those mentioned in this document.
WARRANTY PROCESS
A Return Material Authorization number must be obtained from our Customer Service Department prior to returning any product. We may require the original item to be returned postage prepaid for final determination. Shipping charges will apply for any repair or replacement. Other than postage or shipping charges, no charge will be made for repair or replacement under this warranty.
This warranty gives you specific legal rights. As a consumer, you may also have additional rights and remedies under the laws of your state.
WARRANTY REGISTRATION Warranty registration must be on file and/or proof of original purchase (detailed and dated receipt) required for warranty to be effective.
Register online at https://realtruck.com/truxedo-warranty/