Spring Savings - Up to $400 Off! Shop Deals
RealTruck Truxedo Pro X15 (GEN 2) Soft Roll Up Tonneau Cover
Features
THE QUIETEST SOFT COVER NEVER FLAPS IN THE WIND
NO-FLAP 5-LAYER RTxTECHWEAVE
- Textured 120-grade RTxTechWeave™ with 5-layer composite stretches tighter than other materials to eliminate flapping for a quiet ride.
LOWER PROFILE MINIMIZES WIND DRAG
- Specially designed 15-degree side rails position the cover nearly flush to the bed rails—33% lower profile than Lo Pro—reducing flapping and wind noise.
QUIET RIDE FOR LIFE
- We invented the DriveTight™ tension control system to provide an always-tight, no-flutter fit with no need for manual adjustments for the life of the cover.
PATENTED RTxGRIP™ STAYS CLOSED
- Patented RTxGrip™ multi-tiered hook-and-loop holds on strong and stays closed in all conditions.
STRONGER CROSS-FRAMES THAN CHEAP IMPORTS
- Exclusive aluminum cross-frame reinforcements prevents sagging under rain, hail, and snow.
OPEN WITH JUST ONE FINGER
- Easy-to-use trigger latch releases with one finger, allowing the cover to open with ease.
HASSLE-FREE WARRANTY
- Limited Lifetime Warranty supported by dedicated product experts and customer service team based in the USA.
INSTALL IN UNDER 30 MINUTES
- Quick and easy one-person install in under 30 minutes with minimal tools required.
Description
The RealTruck TruXedo® Pro X15 is the quietest, most refined soft folding tonneau cover on the market—it never flaps in the wind. Built for truck owners who crave sleek, ultra-low-profile styling without sacrificing durability, the Pro X15 is crafted from premium materials and features innovative design elements for a lifetime of quiet performance.
At the core of the Pro X15 is the no-flap, 5-layer RTxTechWeave™ overlay. This textured, 120-grade composite stretches tighter than traditional vinyls, eliminating flapping for a quiet ride. Specially designed 15-degree side rails position the cover nearly flush with your bed rails, minimizing drag, reducing flapping, and delivering a sleek appearance that’s 33 percent lower profile than the Lo Pro.
Our patented DriveTight™ tension control system is the icing on the cake, providing an always-tight, no-flutter fit with no need for manual adjustments for the life of the cover. RTxGrip™ multi-tiered hook-and-loop holds on strong and stays closed in all conditions. Beneath the RTxTechWeave overlay, exclusive aluminum cross-frame reinforcements are stronger than cheap imports and help prevent sagging from rain, hail, or snow.
Operation is effortless—open the cover with just one finger using the easy trigger latch. The cover rolls tight, stays straight, and aligns perfectly whether open or closed with exclusive stay-straight controls. When full bed access is required, the patented quick-release handle allows full removal in seconds with no tools required.
Installation is quick and easy with a clamp-on, no-drill system. Proven in extreme climates from Alaska to Florida, the Pro X15 has been tested from -40º to 180ºF and up to 95 percent humidity. The TruXedo Pro X15 is proudly assembled in the USA and backed by a limited lifetime warranty.
PRODUCT HIGHLIGHTS
- The quietest soft cover—never flaps in the wind
- No-flap 5-layer RTxTechWeave™ construction
- X15 15-degree side rails deliver 33% lower profile than Lo Pro
- DriveTight™ tension control system—always tight, no manual adjustments
- Patented RTxGrip™ multi-tiered hook-and-loop closure
- Exclusive aluminum cross-frame reinforcements prevent sagging
- One-finger trigger latch operation
- Rolls tight and true with stay-straight controls
- Patented quick-release handle for tool-free removal
- Clamp-on, no-drill installation in under 30 minutes
- Assembled in the USA
- Limited lifetime warranty
Installation
INSTALLATION TIME
Less than 1 hour
INSTALLATION DIFFICULTY
LEVEL 1: Simple Installation
INSTALLATION OVERVIEW
The TruXedo Pro X15 features a simple clamp-on installation—no cutting, drilling, or modifications required. Installation takes approximately 30 minutes, and removal is even faster with the patented quick-release handle.
For installation tips and tricks, contact the experts and check out our comprehensive install guides.
Get It Installed
Warranty
LIMITED LIFETIME WARRANTY
WARRANTY COVERAGE This truck bed cover is warrantied against defects in materials or workmanship as follows. This warranty is void if the product has been damaged in an accident, or due to neglect, unforeseeable use, improper installation, improper servicing, or other cause not arising out of defects in material or workmanship.
LIMITED LIFETIME WARRANTY ON HARD PARTS All hardware included with your truck bed cover, including rails, clamps and bows carry a limited lifetime warranty, subject to the terms below.
LIMITED LIFETIME WARRANTY FOR FABRIC The fabric on your truck bed cover carries a limited lifetime warranty, subject to the terms below.
WARRANTY IS NOT TRANSFERABLE The warranty is to the initial consumer purchasing the truck bed cover and it is not transferrable to a subsequent end user. Proof of purchase may be required to enforce these warranty rights.
WARRANTY CONDITIONS Failure to follow these warnings and care instructions will void the warranty:
- Clean with mild automotive soap and water only.
- Do not use conditioners that contain silicone or petroleum.
- The tonneau cover must be secured at all points when the vehicle is in motion. When not fully closed with the rear latch engaged the cover must be completely rolled up and secured at the cab with both provided retainer straps attached. Do NOT drive with the bed cover in a partially open position.
- Cargo should not contact the tarp at any point. Protrusions in the tarp will stress the fabric. Cargo may also shift while traveling causing it to press against the fabric and damage it.
- Check rail clamps for tightness after a week of driving following the installation of the cover and periodically thereafter.
- Do NOT roll the cover into the rear cab window. Do NOT stow the cover against the cab of the truck.
- If the cover is going to be rolled open for an extended amount of time, periodically re-roll the cover and secure the retainer straps to ensure the cover doesn’t rest against the cab of the truck.
- Before opening, the cover must be free of all foreign materials including snow and ice.
- Do NOT tow your vehicle from the rear with the cover on your vehicle. If towing from the rear is required, the cover MUST be removed from the vehicle and properly stored.
WARRANTY PERFORMANCE If all warranty conditions are met, a defective truck bed cover, tarp, or hardware component will either be repaired or replaced (at our option). We reserve the right, for any warranty, to substitute a newer model of bed cover having similar form and function, to offer a warranty discount on an entire replacement system, and/or provide remedies other than those mentioned in this document.
WARRANTY PROCESS
A Return Material Authorization number must be obtained from our Customer Service Department prior to returning any product. We may require the original item to be returned postage prepaid for final determination. Shipping charges will apply for any repair or replacement. Other than postage or shipping charges, no charge will be made for repair or replacement under this warranty.
This warranty gives you specific legal rights. As a consumer, you may also have additional rights and remedies under the laws of your state.
WARRANTY REGISTRATION Warranty registration must be on file and/or proof of original purchase (detailed and dated receipt) required for warranty to be effective.
Register online at https://realtruck.com/truxedo-warranty/