Get up to $400 Off Truck Bed Covers – Shop Now
The TRUKD 6.5 Inch Truck Bed Rack is designed to help you with your stuff, regardless of where you are going. This rack is designed to work with many items including: tents, skis, long kayaks and more! If you want a rack that can carry your tent below the roofline- with the 6.5 inch TRUKD Rack works well. This rack works well with retractable tonneau covers, so get TRUKD with the TRUKD 6.5 Inch Truck Bed Rack.
Make sure your received everything in the correct quantities for installation:
4 Upright Brackets (6.5" or 12.5")
4 Faceplates (6.5" or 12.5")
4 Bar Brackets
4 Bed Clamps (truck models without bed side utility rails)
8 Utility Rail T-nuts (truck models with bed side utility rails)
2 Cross Bars
Bag 1 - Bolts
8x ? - 16 bolts
Bag 2A - Screws and Washers
16 1/4-20 x ?" screws and washers
Bag 3 - Screws and Washers (Upright to Bar Bracket)
8 3/8-16 x 1" screws
8 large shoulder washers
8 small shoulder washers
Bag 4A - T-nuts and screws (Crossbar to bar brackets)
24 t-nuts
24 ¼ -20 x .5"screws
1 tube of blue thread locker
Tools Required:
Measuring Tape
Hex Drivers (4 Sizes)
Socket Wrench Set
*we do not recommend using power tools for this installation
PRE INSTALL NOTES: You will likely need to remove your Tonneau cover to attach the brackets in step 4. After the brackets are installed and in position you will need to reinstall your Tonneau cover before attaching the crossbars. Racks with bedside rails must be removed and depending on placement of the uprights, others may need to be removed as well.