Black Friday Deals – Up to $400 Off – Shop Now
TRUKD 24.5 Inch Truck Bed Rack
Description
The TRUKD 24.5 Inch Truck Bed Rack is designed to offer you signifigant flexibility for those who don't always do the same thing. The flexibility aspect is that you can adjust the height of your rack between 6.5 inches to 24.5 inches in 2- inch increments. This rack is designed to work with many items including: tents, skis, long kayaks, and more! . Most tri- fold tonneau covers are fully functional, and this rack has the ability to add an additional cross bar. For work or play the TRUKD 24.5 Inch Truck Bed Rack can always adjust to fit your needs..
Features
- Includes: four 18 inch uprights, four six inch riser attachments, two crossbars, bed attachment hardware, two front to bach connectors, one box of hardware w/ thread lock
- Second crossbar can be added
- Made of ten gauge steel & aluminum
- Finish is a textured black powder coat/ e- coat + texture black powder coat on steel parts
- Load rating: driving load is 250 pounds for a set; parked load 1000 pounds for the set
- Two year Warranty
- Made in the USA
Installation
Components
4 Upright Brackets (18.5")
4 Faceplates (18.5")
4 Riser Bar Brackets
2 Crossbars
8 Connector Brackets
4 1.5" aluminum connector sections
2 Adjustable Braces
4 Bed Clamps (truck models without bed side utility rails)
8 Utility Rail T-nuts (truck models with bed side utility rails)
4 T slot Stud Plates ( T-slot Racks only)
4 Bar End Caps (24.5" only)
Hardware
Bag 1
8x ? - 16 bolts
8X 3/8" Lock Washers
8x 3/8" Flat Washers
Bag 2B
24 1/4-20 x ?" screws and washers
Bag 3
8 3/8-16 x 1" screws
8 large shoulder washers
8 small shoulder washers
Bag 4B
80 t-nuts
80 ¼ -20 x .5" screws
80 Flat Washers
1X tube of blue thread locker
Tools Required:
Measuring Tape
Hex Drivers (4 Sizes)
Anti-Seize Grease
*we do not recommend using power tools for this installation
PRE INSTALL NOTES: You will likely need to remove your Tonneau cover to attach the brackets in step 4. After the brackets are installed and in position you will need to reinstall your Tonneau cover before attaching the crossbars. Racks with bedside rails must be removed and depending on placement of the uprights, others may need to be removed as well.