Get up to $400 Off Truck Bed Covers β Shop Now
The TRUKD 18.5 Inch Truck Bed Rack is designed to help you and your stuff to where you are going. This rack is designed to work with many items including: bikes, snowboards, canoes and more! If you want a rack that can carry your tent below the roofline- with the 18.5 inch TRUKD Rack works well. Most tonneau covers are compatible, but not fully functional. Get ready to hit the road with the TRUKD 18.5 Inch Truck Bed Rack.
Components
4 Upright Brackets (18.5")
4 Faceplates (18.5")
4 Riser Bar Brackets
2 Crossbars
8 Connector Brackets
4 1.5" aluminum connector sections
2 Adjustable Braces
4 Bed Clamps (truck models without bed side utility rails)
8 Utility Rail T-nuts (truck models with bed side utility rails)
4 T slot Stud Plates ( T-slot Racks only)
4 Bar End Caps (24.5" only)
Hardware
Bag 1
8x ? - 16 bolts
8X 3/8" Lock Washers
8x 3/8" Flat Washers
Bag 2B
24 1/4-20 x ?" screws and washers
Bag 3
8 3/8-16 x 1" screws
8 large shoulder washers
8 small shoulder washers
Bag 4B
80 t-nuts
80 ΒΌ -20 x .5" screws
80 Flat Washers
1X tube of blue thread locker
Tools Required:
Measuring Tape
Hex Drivers (4 Sizes)
Anti-Seize Grease
*we do not recommend using power tools for this installation
PRE INSTALL NOTES: You will likely need to remove your Tonneau cover to attach the brackets in step 4. After the brackets are installed and in position you will need to reinstall your Tonneau cover before attaching the crossbars. Racks with bedside rails must be removed and depending on placement of the uprights, others may need to be removed as well.