Superlift 4" Lift Kit

This is Superlift's complete knuckle style suspension lift kit for the 1998-1999, or2000-2010 Ford Ranger 4wd; providing 4" of lift height.
Features:

New nodular iron knuckles, not ball joint spacers
Load bearing bracketry made of .25" thick plate steel or heavy-wall tubing
Full-width differential/control arm crossmembers provide lateral rigidity
Rear lift achieved via blocks
Front / rear Superide shocks included
Heavy-duty replacement front driveshaft available

The lift kit retains factory ride quality, steering geometry, and CV axle angles. All load-bearing bracketry is laser-cut from .25" steel plate. This replacement steering knuckle lift includes lower control arm crossmembers, plus bracketry to lower the torsion bar crossmember. A 3" block kit provides rear lift. The lift kit includes front and rear Superlift shocks.NOTE:FX4 models require optional Rear U-bolt Kit part # 10914.

Tire	Wheel	Backspacing	Offset
33 x 12.5	15 x 8	3.5 - 4	-
33 x 12.5	16 x 8	3.5 - 4	-

IMPORTANT DISCLAIMER: The provided tire/wheel fitments are approximate. Actual dimensions of a given tire size can vary considerably from one brand to another. Manufacturers' wheel offset and backspacing measurement points are not always consistent. Backspacing greatly impacts tire-to-fender clearance when turning. Wheel width and backspacing influence whether the tires protrude past the fenders, and to what extent. Considering these IMPORTANT factors, we recommend that you fit-check your tire/wheel selection prior to purchasing.