Get up to $400 Off Truck Bed Covers – Shop Now
Description
Even on a freshly rebuilt, or brand new engine, the coolant is usually contaminated with microscopic particles including casting sand leftover from the manufacturing process, metal shavings, rust, and mineral deposits, all of which can diminish the cooling system's ability to absorb heat. If these particles are left inside the engine, they can actually cause premature wear to the bearings inside your water pump and cause expensive damage to the small passages inside your EGR cooler and oil cooler. With the Sinister Diesel Coolant Filtration System you can be sure your cooling system is working at maximum efficiency for a long time to come.
The Sinister Diesel Coolant Filtration System is designed to bypass and filter small amounts of the engine's coolant while your diesel engine is running. The filter block is constructed from anodized aluminum and attaches to a supplied bracket, which mounts to factory holes so that no drilling is required. The filter block includes two threaded inlet ports and one outlet port, and includes all fittings needed for installation. The silicone hose fittings are pre-assembled for simple, leak-proof connections that are factory tested at twice the recommended radiator cap pressure.
The Sinister Diesel Coolant Filtration System comes with either a WIX or CAT Coolant Filter that can be easily unscrewed for replacement. And it is recommended that the first filter be replaced at 500 miles, with replacement of the second and third filters at 3,000 miles each. After 3 changes, the filter can be replaced once a year. Additionally, these coolant filtration systems are covered against manufacturer defects for one year.
Features
- Filter Block: Constructed from Aluminum
- Hose: Made from Silicone
- Anodized in a Sinister Blue Finish
- Abrasion Resistant Hoses
- Helps to Clean Coolant for Longer Engine Life
- All Installation Hardware Included
- 1-Year Warranty
Installation
The Sinister Diesel Coolant Filtration System takes approximately 2 hours for installation. All of the required installation hardware will be included. Installation time may vary based on experience. For additional information please call our customer service team at 1-888-257-3323.
Warranty
Sinister Diesel branded products covered by this warranty are warranted to the original owner against manufacturing defects in materials and workmanship for one (1) year from the date of purchase. This warranty applies to specified Sinister Diesel branded products. All warranty requests and claims for products built by other manufacturer(s), have to be made directly with the manufacturer(s) themselves. If your Sinister Diesel product covered by this warranty fails due to a manufacturing defect Sinister Diesel will repair it without charge, or replace it, at Sinister Diesel's discretion. Only original, unaltered and unmodified items and workmanship are covered. This warranty does not cover gaskets, rubber or silicone hoses, o-rings and other wearable parts, damage caused by accident, improper care, negligence, normal wear and tear, or the natural breakdown of colors and materials over extended time and use.
Warranty Terms and Conditions:
- Racing - Also, due to the nature of Race Only Parts, these items are not returnable or refundable. ALL SALES ARE FINAL and these products have no warranty.
- Street - The warranty for parts designated "street legal" covers manufacturer defects. Should a "street legal" part fail due to a defect in manufacturing as determined by Sinister Diesel, customer is entitled to replacement of that specific part, or the equivalent amount in Store Credit. No credit will be issued for labor expenses incurred.
- To initiate a warranty claim, please contact our Warranty Department to begin the process.
- All warranty determinations including, but not limited to, the cause of part failure and customer remedy will be determined solely by Sinister Diesel.
- In all cases, the item must not have exceeded the Manufacturer's warranty period.
- If the part was built by another Manufacturer, all Warranty Requests and Claims have to be made directly with the Manufacturer themselves.
- Gaskets, O-Rings and other Wearable Parts are not covered under Warranty
This warranty is only available in the United States and Canada. Sinister Diesel is not responsible for direct, incidental or consequential damages for any reason including damage resulting from a breach of a warranty or condition such as scratches in a device surface, lost data or lost or destroyed personal property. Some states do not allow the exclusion or limitation of incidental or consequential damages, so the above limitation or exclusion may not apply to you. Some states do not allow limitations on how long an implied warranty lasts, so the above limitations on the duration of the warranty may not apply to you.
Exchanges under Sinister Diesel's Warranty Policy include the following options:
- Potentially defective part must be returned to Sinister Diesel for Warranty Inspection. If found to have a Manufacturer Flaw or Defect, the replacement part will then be shipped out.
- Replacement part can be purchased now, and potentially defective part must then be returned to Sinister Diesel for Warranty Inspection. If found to have a Manufacturer Flaw or Defect, a refund will be issued for the purchase of the replacement part.
