Get up to $400 Off Truck Bed Covers – Shop Now
Rugged Ridge Snatch Block Pulley - 20,000 LB
Description
This heavy-duty 8" Rugged Ridge Snatch Block is made from 3/16" re-enforced steel and has a breaking strength of 20,000 lb. It is compatible with winch line up to 3/8" in diameter and winches rated up to 10,000 lb. A Snatch Block can really come in handy in a sticky situation! They allow you to double the line capacity of your winch, when things are not looking promising with just a single line pull. You can also use them to change direction of the winch line, when the recovery vehicle is not able to get a straight pulling angle to the vehicle needing to be recovered.
Note: Do not use synthetic rope on a pulley once you have run steel line through it, as it can cause mar up the pulley wheel and cause damage to synthetic rope.
Features
- Manufactured from cold rolled steel
- Features 20,000 lb breaking capacity
- Compatible with up to 3/8" diameter winch line
- Ideal for use with Jeeps and mid-size trucks
- Doubles the line capacity as well as reducing strain on winch motor
- Pair with a Line Damper if using with steel cable (damper not included)
- Backed with Rugged Ridge's limited 5-year warranty
Order Notes
WARNING
Because of the pulley's capability to increase your line pull rating, it is important to understand winching basics and know that improper setup can potentially lead to line failure and could cause serious bodily injury. Always use a line dampener when using wire rope and stand clear of the potential danger zone when using a winch with or without a pulley. Also, these pulley blocks are not designed for hoisting. Be sure to read and understand instructions before using any towing or recovery gear. Please give us a call if you have any questions or concerns!
Warranty
RUGGED RIDGE 5 YEAR WARRANTY
When your product is purchased from Omix-ADA®/Rugged Ridge and is not separately warranted by either Omix-ADA® or the manufacturer, then this Limited Warranty gives you specific legal rights and is the only warranty Omix-ADA® makes in connection with your purchase. Omix-ADA® neither assumes nor authorizes any manufacturer, vendor, retailer, other person or entity to assume for it any other obligation or liability in connection with its products or this Limited Warranty.
What is Covered?
Subject to the terms, exclusions and limitations herein and with respect only to products first sold in the United States, Omix-ADA®/Rugged Ridge warrants to the initial retail purchaser ("purchaser") only that when installed and used on purchaser’s vehicle according to supplied product installation instructions and/or warnings, purchaser’s Omix-ADA® product and family of brands (Rugged Ridge, Alloy USA, Havoc, Precision Gear, Outland Automotive) shall be free of defects in material and workmanship for five (5) years. This Limited Warranty shall be measured from the date of initial retail purchase, extends only to the initial retail purchaser and is not transferable. ALL OTHER EXPRESS OR IMPLIED WARRANTIES ARE HEREBY DISCLAIMED, INCLUDING BUT NOT LIMITED TO IMPLIED WARRANTIES OR MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. Your warrantor for these parts is Omix-ADA®. Omix-ADA® reserves the right to: (a.) require proof of purchase as a condition of this Limited Warranty please use warranty registration card, (b.) make future revisions to this product or it’s Limited Warranty without obligation to conform existing product or provide purchaser with prior notice.
