Black Friday Deals – Up to $400 Off – Shop Now
Description
After installing oversized tires or regearing your vehicle’s differentials to non-stock ratio gears, you’ll likely notice an improper reading on the speedometer, inaccurate MPG estimates, and even poor shift points with an automatic transmission. These issues are typically caused by a miscommunication between your vehicle’s computer and speed sensor, as the factory tune can’t compensate for the altered gearing or RPM. To address these issues, consider a Speedometer & Odometer Calibrator from Hypertech!
This premium plug-and-play module offers the same functions as Hypertech’s Max Energy programmers, only without the tuning capabilities. With a simple plug into your vehicle’s OBD2 port, you can navigate the Calibrator’s simple menu to adjust the speedometer and odometer settings, accounting for aftermarket gearing or oversized tires up to 54 inches tall. This product takes only minutes to recalibrate your vehicle’s computer, quickly ensuring accurate readings to get your ride back on the road and operating as intended!
Aside from recalibrating, this product features full code reading functionality, allowing you to scan, read, and delete diagnostic trouble codes from your vehicle’s computer. This feature is helpful when diagnosing and repairing issues, allowing you to turn off check engine lights and assess for stored and active fault codes.
So skip outlandishly expensive diagnostic and calibration tools; instead, opt for the simplicity and budget-minded approach of the Hypertech Speedometer & Odometer Calibrator!
Features
- Simple plug-and-play module
- Recalibrates the speedometer for larger tires, ensuring accurate mileage readings and shift points
- Recalibrates for up to 54" tall tires
- Corrects speedometer & odometer readings to work with non-stock ratio rear-end gears.
- Reads and clears diagnostic trouble codes (DTCs)
- Simple plug & play operation into the vehicle’s OBD2 port
- Recalibration takes only minutes
- Limited 1-year warranty
Order Notes
The Speedometer Calibration Programmer can only be used with one vehicle at a time. As with all other programmers, once programmed, the programmer is locked to that vehicle and cannot be used with any other vehicles until the programmed vehicle is returned to stock settings.
Installation
The Hypertech Speedometer & Odometer Calibrator features a simple plug-and-play installation. Simply plug the device into your vehicle’s OBD2 port, follow the easy-to-navigate menu, and enjoy your accurate gauges and shift points!
For additional information, contact our qualified service experts.
Warranty
Product Warranty
1 Year Factory Direct Limited Warranty
Hypertech products are warranted against defects in materials or workmanship for one year from the date of purchase. Hypertech's liability under this warranty shall be limited to the prompt correction or replacement of any defective part of the product which Hypertech determines to be necessary. This limited one (1) year warranty is to the original purchaser providing all the information requested is furnished. You must retain a copy of your original sales invoice or receipt. Without proper documentation, a service fee will be applied. Third party resellers and resold units are NOT covered under this warranty.
Return Your Vehicle To Stock Tuning
BEFORE Taking Your Vehicle In For Service
If you take your vehicle to a dealer or mechanic for service, you must first remove the Hypertech Power Tuning and restore the stock programming. This is because diagnostic devices expect to find stock calibrations and will often overwrite the program if the latest stock calibration is not found in the computer's memory. This will result in the loss of your Hypertech Power Tuning data. The Power Tuning can be easily removed to restore the stock tuning before you take your vehicle in for service, enabling the service technician to upgrade your stock calibrations. After the service is complete, you can reinstall your Hypertech Power Tuning. If you have any questions related to service issues, please call Hypertech at 901.382.8888.
