Get up to $400 Off Truck Bed Covers – Shop Now
Description
The B&W Turnoverball Gooseneck Hitch is the #1 selling gooseneck hitch in America that you can count on to get you and your trailer to your destination safely. The innovative design allows you to have a hitch when you need it and a level bed when you don’t. It doesn’t get any more simple than that. The hitch converts to a level bed in seconds. All you have to do is remove the ball, flip it upside down, and drop it in the socket. There is a flexible latch pin handle attached to a spring loaded, 5/8" steel locking pin that goes completely through the ball. With the turnoverball gooseneck hitch, you already have the mounting system for the B&W Companion 5th wheel hitch as well, if you decide to go that route.
The B&W Turnoverball Gooseneck Hitch is a beefy under-bed mounting system that is custom fit specifically for your truck and bolts to existing holes in the frame. It is rated to tow what your truck is rated to tow. It is constructed from a solid, one-piece machined receiver socket with a durable powder-coat finish. It comes with a solid, machine 2 5/16" ball and requires only a 4" hole in the bed. B&W knows that you have a lot riding on your hitch and that a hitch is only as good as the quality of its steel and the welds that hold it together. For that reason, they only trust and use American-made steel and insist on making the welds under their roof. When it comes to B&W you can count on products that are made right here in the USA and are SAE-J2638 certified. B&W stands behind the products with a limited lifetime warranty.
The B&W Turnoverball Gooseneck Hitch is built to tow anything your truck can. Get yours today and unleash your towing capabilities!
Features
- The #1 selling gooseneck hitch in America
- Custom fit for your model truck
- A hitch when you need it, a level bed when you don’t
- Solid, one-piece machined receiver socket
- Durable powder-coat finish
- Includes a solid, machined 2 5/16" ball
- Bolts to existing holes in the frame
- Only a 4" hole in the bed
- Flexible latch pin handle attached to a spring-loaded 5/8" steel locking pin
- Options available include B&W Gooseneck Balls, Extenders, Eyelets, Kingpins, Helpers & Plugs.
- Exclusive 5th wheel add-on: B&W Companion 5th Wheel Hitch
- Works with spray-in bed liners
- SAE-J2638 certified
- Limited lifetime warranty
- Made in the USA - Humboldt, KS
Installation
B&W engineered the Turnoverball to be installed easily. Because you don't have to remove the bed, weld, or drill through the frame, the installation basically consists of drilling a 4" hole in the bed and bolting the hitch parts to the frame. Installation does vary depending on the vehicle. Some models require drilling while others do not. Once you put your vehicle information in there will be a vehicle specific PDF install guide to view. You can also check out the installation videos below on a few different trucks. If you have any questions feel free to give us a call!
Warranty
B&W stands behind their products and has backed the Turnoverball Gooseneck Hitch by a limited lifetime warranty which covers any defects in materials or workmanship. The warranty only applies to the original purchaser and does not cover accidents, abuse, misuse, or neglect. Normal wear and tear should not result in product failure and is not covered by this warranty. If defective, B&W will either repair or replace the product or product component free of charge. You can register your product at https://www.bwtrailerhitches.com/forms/warranty-product-registration
