Get up to $400 Off Truck Bed Covers – Shop Now
If you are looking for an innovative pintle hitch that also has a dual purpose of a ball mount, then check out the B&W Tow & Stow Pintle Hitch. This pintle hook and hitch ball combo lets you easily hook-up to any trailer. It has many of the same great features as the traditional Tow & Stow but can carry even heavier loads. It has a 16,000 lbs. gross trailer weight when used us a pintle hitch and a 10,000 lbs. capacity when used as a ball mount. The trailer’s loop goes over the ball and the thick plate drops down to secure it. Once the pintle is down you are ready to tow! When you are done towing you can easily flip the pintle hook combo and stow it underneath your vehicle.
The B&W Tow & Stow Pintle Hitch is available for either 2" or 2.5" receiver hitches. You can purchase it with either a 2" or 2-5/16" ball. It has an 8.5" drop and a 4.5" rise. It requires a minimum of 11" of clearance between the ground and the lowest part of the hitch. It is adjustable in height and can be adjusted in 1" increments. The adjustable height allows you to tow trailers of different heights with the same vehicle. The pintle hook connects to lunette ring couplers while the hitch ball connects to standard ball couplers.
B&W uses the highest quality materials and craftsmanship to ensure your hitch lasts for years down the road. Every component of this hitch is manufactured to be corrosion resistant. The shank and platform of this hitch are constructed from heavy-duty steel with a black powder-coat finish. The ball is made using a dual process chrome plating. The pins are made from stainless steel. B&W knows that you have a lot riding on your hitch and that a hitch is only as good as the quality of its steel and the welds that hold it together. For that reason, they only trust and use American-made steel and insist on making the welds under their roof. When it comes to B&W you can count on products that are made right here in the USA and are SAE-J2638 certified. B&W stands behind their products with a limited lifetime warranty.
If you have multiple trailers or couplers make your life easier with the B&W Tow & Stow Pintle Hitch today!
The B&W Tow & Stow Pintle Hitch slips into your factory receiver hitch, installing in seconds.
B&W stands behind their products and has backed the Tow & Stow Pintle Hitch with a limited lifetime warranty which covers any defects in materials or workmanship. The warranty only applies to the original purchaser and does not cover accidents, abuse, misuse, or neglect. Normal wear and tear should not result in product failure and is not covered by this warranty. If defective, B&W will either repair or replace the product or product component free of charge. You can register your product at https://www.bwtrailerhitches.com/forms/warranty-product-registration