TruXedo is a RealTruck brand. When you buy TruXedo from RealTruck, you are buying direct from the manufacturer.
Every tonneau cover creates a vacuum effect sucking up dirt, dust and water into your truck bed. The solution is to add a TruXseal tailgate seal from the fine folks at TruXedo. With multiple options available, there is plenty to fit around the entire tailgate of the largest trucks preventing water and dirt from getting in your bed. Mounting is simple and easy with the included 3M adhesive tape and cleaning pads. Help keep the elements out of your bed by adding a TruXseal tailgate seal! Manufactured by TruXedo, a RealTruck company.
READ INSTRUCTIONS CAREFULLLY PRIOR TO INSTALLATION
The following instructions are valid for all makes and models of pickups, foreign and domestic. Due to the variety of designs, however, the Applications of TruXseal to your vehicle may differ slightly. The best way to evaluate which method is best for your vehicle is to cut 1" piece of TruXseal and attach the seal to ensure that the bulb compresses when the tailgate is closed. Experiment with the 1" piece until you find the best configuration for your vehicle.
PLEASE NOTE: TruXseal will always apply bulb side up to the horizontal area of the bed.
ITEMS NEEDED TO PROPERLY INSTALL TruXseal:
1. Scissors or utility knife
2. Clean rags
3. Warm water and mild dishwashing soap solution
STEP 1: Clean area thoroughly with soap and water solution where TruXseal is to be applied. Wipe the area until it is completely dry. Use alcohol pads included to further prepare the Applications area. Allow the area to dry for a couple of minutes.
STEP 2: Ensure that tailgate is down prior to Applications. Measure the length of the area from sidewall to sidewall along the bottom of the bed of your pick-up. Cut a piece of TruXseal to the length that is necessary to cover the area. Peel back orange liner and apply TruXseal in a straight line to the bottom edge of the bed first. Begin at one sidewall and continue to the opposing sidewall. The flat portion on the top of the bulb should be flush with the flat portion of the bed. Apply pressure to the seal by running your finger across the entire length. Close the tailgate to confirm that the bulb is compressing when closed.
STEP 3: Cut a small piece of TruXseal (to be adhered to the side wall of the bed) to the length that will provide a seal up to the top of the tailgate. Begin at the bottom and continue as in Step 2. Apply TruXseal to both sides in identical fashion. Be sure to close the tailgate to evaluate the compression of the seal. Small adjustments may need to be made to properly affix the seal.
STEP 4: Completely close the tailgate. If you see any daylight between the seal and the tailgate, you can make a small adjustment by slightly removing the seal and replacing it where it makes a better seal.
TruXedo warrants that all new, unused products are free from defects in material and workmanship for the length of its warranty from the retail date of purchase. Proof of purchase is required and warranty is nontransferable and is valid to the original purchaser only. This Warranty is effective if the product is properly installed and used for the purpose intended for the life of the product. TruXedo's obligation under this Warranty is limited to repairing, or at its option, replacing any part that is returned, transportation prepaid, to TruXedo, Yankton, South Dakota, if the product is, in our judgment, defective. All materials must be accompanied by an RMA (Returned Material Authorization) number requested by and authorized in advance of returning the materials. TruXedo shall not be liable or responsible to supply or pay labor to replace any part found defective, nor shall it be liable for any damages of any kind or nature to person, product, or property.
There are no Warranties for used products or products that have been repaired, altered, modified, subjected to misuse, negligence, accident or ordinary wear and tear. Limitations may apply to logo screen printing. Call 1-877-878-9336 for complete details.
TruXedo products are sold without any express warranty except as set forth above. TruXedo is not obligated to honor warranty claims if Genuine TruXedo parts are not utilized.
TruXedo and TruXport tonneau covers purchased through an authorized dealer are eligible for the full manufacturer's warranty. Anyone who purchases product(s) through eBay or other unauthorized internet sites should be aware that they may be buying used, defective, or incomplete product(s) and that the product(s) purchased may not be covered under warranty.