Anyone who takes up any form of motorsports as a hobby will eventually need recovery gear to get themselves or a trailmate out of a sticky situation. Literally. BullDog Winch Co has worked hard to earn a reputation for making some of the highest quality recovery gear you can find and puts their products through rigorous testing, to ensure they live up to the specifications. That is why you should feel confident every time you use a Big Dog Kinetic Recovery Rope from BullDog Winch Co. They are offered in five different sizes, to cover any type of recovery from ATV/UTVs to Jeeps and trucks, to semi trucks and farm equipment!
This Big Dog Kinetic Recovery Rope is perfect for ATV/UTV recoveries and can be stowed away wet or dry in the included camo-mesh storage duffle! It is 5/8" in diameter and 20' long and made with high quality nylon that features about 25% in elasticity to allow you to use the built up kinetic energy to help pull stuck vehicles free. The looped ends are protected with durable polyurethane coating to help ensure longevity. It is rated with a Working Load Limit (WLL) of 6,100 LB and has a breaking strength of 12,200 LB!
Always read all safety instructions and take the proper safety precautions during any recovery operation. These ropes are tough enough to be used over and over if properly taken care of, but should always be replaced if the rope appears to be damaged. BullDog Winch Co stands behind their Big Dog Kinetic Energy Recovery Ropes with a limited one year warranty, and we will always cover the cost of standard shipping to get it to you! Give us a call or chat to order your BullDog Winch Co Recovery Gear today!
|Warranty||1 Year Limited Warranty|
Always use the appropriate rated recovery gear for your vehicle! It is paramount to carefully plan out every step before engaging in every recovery operation and exercise safety precautions. No two recoveries are alike, and each operation requires careful planning so you can perform a safe recovery. If you are unsure of what capacity you need or would help selecting a pre-assembled recovery kit or building one just for you, please give our team a call or chat with us online and we will be happy to help!
Always exercise extreme caution during any recovery operation. Check and double check all of your recovery gear before each use and again after use, to look for any damage to your Kinetic Recovery Ropes. It is extremely important to never use a damaged rope! Once your gear is inspected, read on for information on how to properly connect the Recovery Rope to your intended recovery points and attempt a safe and successful recovery.
To begin, wear winching or mechanic gloves to protect your hands and always use the correct sized kinetic recovery rope for the job. Then, prepare for recovery by hooking your kinetic tow rope to low points on the vehicle in need of recovery and the vehicle doing the recovering. Always begin attempting recovery with a kinetic rope by pulling the rope snug. This is referred to as a static pull. Slowly accelerate to see if the stuck vehicle will start moving. If that doesn’t get the job done, try backing toward the stuck vehicle by 3-4 feet and slowly drive forward at no more than 10 mph with a running start, until your vehicle begins to slow, letting tension in the rope draw tight. Next, let off the gas, hold the brakes, and let the built-up kinetic energy transfer to the disabled vehicle to see if it moves. If the stuck vehicle still isn't budging, try backing up a little closer still, and again attempt recovery beginning with a slow running start. Be sure never to attempt a recovery with the rope at an angle to avoid injury and possibly tipping over the stuck vehicle. If this fails, you may need to try recovering with a second vehicle by pulling in tandem with a larger rope.
BullDog offers a limited one year warranty against defects in materials or workmanship on their kinetic recovery ropes. Please contact us to request additional information!