Free Shipping on Orders $100+
Build Your Truck in 3D with RealTruck Builder
RealTruck AMP Research PowerStep XL
Features
THE ORIGINAL SINCE 2002—EXTRA DROP FOR LIFTED TRUCKS
- DECADES OF PROVEN TECHNOLOGY: Built to perform, year after year. Constructed from corrosion-resistant aluminum and advanced powder coat finish, and engineered to handle tough daily use. Supports up to 300 lbs. per door.
- LOWER STEP HEIGHT FOR LIFTED VEHICLES: Designed to drop up to 3" lower than standard PowerStep for easier entry and exit on lifted vehicles and higher rides.
- UNMATCHED SEAMLESS INTEGRATION: Deploys and retracts automatically in perfect concert with how you use your vehicle. Engineered to connect directly for unmatched integration.
- EXCLUSIVE PLUG‑N‑PLAY INSTALLATION: Patented plug‑n‑play design makes installation easy. No improvised attachments. No complicated wiring. No magnet alignment issues. Just seamless operation, every time.
- CONFIDENT FOOTING, DAY OR NIGHT: A 6" wide step delivers a stable, slip-resistant platform, while integrated LED lighting illuminates the step for improved visibility in low-light conditions.
- DESIGNED TO DISAPPEAR: Automatically retracts tight and out of sight, elevating the look of your vehicle with clean, uninterrupted lines.
Description
The original power-retractable running boards since 2002—now with an extra drop built specifically for lifted trucks and taller rides. The AMP Research® PowerStep™ XL delivers everything the standard PowerStep is known for, with one critical addition—the boards deploy up to three inches lower than the standard PowerStep, making entry and exit significantly easier on lifted vehicles where the standard step height falls short.
Built to perform year after year, the PowerStep XL running boards are constructed from corrosion-resistant aluminum with an advanced powder coat finish engineered to withstand tough daily use without degrading. Stainless steel hinge pins and hardware add long-term durability where it counts. Each board supports up to 300 lbs. per door—the same proven load capacity as the standard PowerStep, in a platform sized for bigger builds.
The PowerStep XL deploys and retracts automatically in harmony with how you use your vehicle—extending when the door opens, and retracting tight and out of sight the moment it closes. A 6-in.-wide step delivers a stable, slip-resistant platform, and integrated LED lighting illuminates the step surface for confident footing in low-light conditions. When retracted, the boards disappear under the vehicle, keeping body lines clean and ground clearance uncompromised while you’re on the move.
AMP Research’s patented plug-n-play design connects directly to your vehicle for unmatched seamless integration—no improvised attachments, no complicated wiring, no magnet alignment issues. Newer applications connect via an OBD II module for a clean, factory-level result. An optional override switch is available for manual control when needed. For owners already running the standard PowerStep, the XL is the purpose-built upgrade for lifted applications where that extra drop makes a real difference.
Professional installation is recommended for all PowerStep XL running boards, though experienced DIYers can complete the install at home using the included vehicle-specific mounting kit, bracketry, hardware, wiring, and instructions. Drilling is required on select applications. Backed by a 5-year limited warranty.
Product Highlights
- The original power-retractable running boards since 2002—purpose-built for lifted trucks and higher rides
- Deploys up to three inches lower than the standard PowerStep for easier entry and exit on lifted vehicles
- Automatically deploys when the door opens, retracts tight and out of sight when closed
- Corrosion-resistant aluminum construction—supports up to 300 lbs. per door
- Advanced powder coat finish and stainless steel hinge pins for long-term durability
- 6-in.-wide slip-resistant step surface for stable footing in all conditions
- Integrated LED lighting illuminates the step for confident entry in low-light conditions
- Retracts under the vehicle to maintain clean lines and maximize ground clearance
- Patented plug-n-play design—no improvised attachments, no complicated wiring, no magnet alignment issues
- Newer applications connect via OBD II module for seamless, factory-level integration
- Optional override switch available for manual control
- Includes vehicle-specific mounting kit with all bracketry, hardware, wiring, and motors
- Drilling required on select applications—professional installation recommended
- 5-year warranty supported by dedicated product experts and a customer service team based in the USA
Order Notes
Cleaning your PowerStep: In adverse conditions, debris such as mud, dirt, and salt may become trapped in the running board mechanism, possibly leading to unwanted noise, or binding.
Prepare for cleaning
Manually set the running boards to deploy: The running boards can be manually set in the deployed position by opening the door, and then place your foot on the step. Leave firm pressure with your foot on the step while you close the door. This will leave your steps in the deployed position.
How to maintain your steps: Using a pressure washer to clean the front and rear linkages which are all 4 hinge points for your PowerSteps. Avoid spraying the motors directly.
After washing, apply silicone spray (dry Film lubricant) only, to all 4 linkage arms and all pivot pins, some of these pins will be located up high on the linkage arm as well. Then cycle the door to work the lubrication in to the hinge points.
Do not apply silicone, wax, or protectants like Armor All® to the running board. Do not lubricate with any greases, oils, WD-40, or penetrants.
This cleaning should be done periodically, or when debris such as mud, dirt or salt becomes trapped in the running board mechanism.
Installation
INSTALLATION OVERVIEW
Each set of AMP Research PowerStep XL running boards includes a vehicle-specific mounting kit with all bracketry, hardware, wiring, and motors needed for a complete installation. Professional installation is recommended for all applications, though experienced DIYers can complete the install at home using the included instructions.
Note that drilling is required on select applications—consult your vehicle-specific installation guide for full tool requirements and estimated time. For additional assistance, contact our knowledgeable support staff and check out our video installation guide.
Get It Installed
Warranty
5-Year Limited Warranty
What is Covered: All defects in materials or workmanship on select AMP Research branded products properly installed per provided instructions except those listed below under the Three Year Warranty. This warranty does not apply to any product from AMP Research direct or indirect subsidiaries.
For How Long: This warranty, and any implied warranties including merchantability and fitness for a particular purpose, lasts five years from the date of purchase. The warranty expires if the product is removed from the original vehicle or if the original vehicle is transferred to another owner. The warranty is not transferable from the original purchaser.
What These Warranties Will Not Cover: These warranties doe not cover any damage, defect, or malfunction caused by misuse, abuse, accident, improper installation, modification, improper or inadequate maintenance, or on-road and offroad hazards. Incidental and consequential damages are not recoverable under this warranty. Some states or providence do not allow the exclusion or limitation of incidental or consequential damages, so this exclusion or limitation may not apply to you.
What AMP Research Will Do: During the applicable warranty period listed above, AMP Research will, at its option, either repair or replace any defective product at no additional charge. You must pay any labor charges associated with removing or reinstalling the product. If a specific product has been discontinued, AMP Research may, at its option, replace your product with a current product of comparable function and value.