 |
|
 |
SnowSport HD Utility Snow Plows (without front hitch) |
|
|
 $1499.00
 $1149.99
 $349.01
 |
|
|
Manufacturer InformationAgri-Cover, Inc. known as ACI has been in business since 1981. They started manufacturing farm tarps. In 1989 they developed the Access Roll-up Tonneau Cover. They are the originators of soft roll-up truck bed covers. Today their automotive products include: Access Roll-up Cover, Access Limited Edition Roll-up Cover, LiteRider Roll-up Cover, Lorado low profile Roll-up Cover, Vanish low profile rolling truck bed covers, Snowsport Utility Snowplows, Snow sport 180 plows, snowsport ATV, access storage pockets, ez truck bed retreiver & the TrailSeal Tailgate Gasket. The Access Cover is the #1 selling roll-up cover in North America.
View all ACI Agri-Cover, Inc. products
Manufacturer Documents
Note: Adobe Reader is required to view PDF documents: Download Adobe Reader
View available Products for this Product Line
|
The SnowSport HD Utility Snow Plow offers easy snow removal from the comfort of your cab. It works on virtually any Jeep or compact, midsize & full size SUV or Pickup Truck. The plow mounts to a 2" front or rear receiver hitch. Snow plowing has never been easier. Say good bye to your snow blower or plow contractor. Snow sport plow kit comes complete with Blade and Push Frame. This snowplow is very easy to operate. The plow is very simple to install and easily attaches to a front or rear 2" receiver hitch. Note: Front or Rear 2" Receiver Hitch sold separately. For 2" front mount receiver hitches we recommend ordering the Snowsport 2" Front Mount Receiver Hitch. Versatility for home owners, contractors, farmers and business owners. The plow has a turf friendly heavy-duty rubber cutting edge. Works great on cement, black top, gravel and won't damage grass surfaces. SnowSport HD plowing system comes standard with an angling interceptor so you plow straight or adjust it to plow at an angle. SnowSport HD snowplows are a clean, simple design that makes snow plowing easy and affordable. Attractive heavy-duty and light weight clear anodized aluminum blade. No wiring or lever controls to clutter the interior of your cab. Plus it is simple to transfer from vehicle to vehicle.
- Hitch Mounted SnowPlows: The SnowSport HD plow is very simple to install and easily attaches to a front or rear 2" receiver hitch. Note: Front 2" Hitch or Rear 2" Receiver Hitch sold separately. For 2" front mount receiver hitches we recommend ordering the Snowsport 2" Front Mount Receiver Hitch. Plow blade and push frame assemble is about 30 minutes.
- Works on Many Vehicles: The Snowsport Plow will work on virtually any compact or full size SUV or Pickup Truck. Perfect for home owners, contractors, business owners and farmers. Snow plowing has never been easier or more affordable.
- Easy to Use: Just attached the push frame to the hitch and put the blade in the transport position on the push frame. Lower the blade with you are ready to plow. Plow snow from the comfort of your cab. Just drive forward to plow and let the blade do the work with the turf friendly heavy duty rubber cutting edge. Then Just Back Up with your vehicle in reverse the blade follows leaving the snow right where you piled it. Drive forward again to plow some more.
- Attactive light weight yet heavy duty extruded Aluminum Blade: Turf friendly heavy-duty rubber cutting edge and rubber box ends work great on cement, black top, gravel and won't damage grass surfaces.
- 3 Position Blade: The Angling Interceptor comes standard. The angling interceptor allows you to plow straight or to angle the blade for plowing long roads or drive ways.
- Kit Includes: Snow sport plow kit comes complete with Blade Assembly, Push Frame and Angling Interceptor. It is very easy to maintain as it has No electrical or hydraulic components to freeze, malfunction or wear out.
- Easy Hook Up: The Fast Attach Push Frame attached to a 2" receiver hitch and secure with hitch pin. Then hang the snowsport plow blade one end at a time onto the push frame (can be done in less than a minute). To plow just lower the blade. To transport the plow just hang the plow blade on the top of the push frame. To remove completely, un hooking is just a easy. You can also leave the blade in the transport position on the push frame all winter long.
- Dual position blade markers: Standard equipment on SnowSport HD for easy snow plow operations.
- Low profile design: SnowSport Personal Utility Plow allows full view of your vehicles' headlights while transporting or plowing.
- Heavy-duty rubber box ends: Gives the plow a larger capacity, so you can move lots of snow quickly and easily.
- For more information or a Free Product Video Call 1-877-216-5446 or 701-253-5906
- Also available SnowSport 180 Plows and SnowSport ATV Plows
Associated DocumentsNote: Adobe Reader is required to view PDF documents: Download Adobe Reader
| Snow Sport Snow Plow Features |
 |
GM Product of the Year
Agri-Cover, Inc the manufacturer of the ACCESS® Roll-up Cover and SNOWSPORT® Personal Utility Plow is proud to receive the prestigious "GM BEST NEW PRODUCT OF THE YEAR" award for SNOWSPORT® at the 2003 SEMA convention |
 |
Angling Interceptor Close Up
The snowsport plow can be ordered with a Straight Interceptor or an Angling Interceptor. The Angling Interceptor comes in handly for long roads or drive ways. |
 |
Drive To Re-engage Plow
Back up & Drive to Re-engage Plow: By backing up, the blade lays back skimming over the surface. Then drive forward, and the blade automatically re-engages for plowing. |
 |
Pushing Snow is Easy
Just Drive Forward and let the plow blade do the work. Then by backing up, the blade lays back skimming over the surface. Then drive forward, and the blade automatically re-engages for plowing. |
 |
Rear Hitch Mounted
The snowport can be mounted on the rear. A 2" rear hitch is needed. |
 |
Blade Markers In Use
Dual position blade markers are standard equipment for easy snow plow operations |
 |
Built Tough - Easy to Use
Anodized 6063-T6 Aluminum extruded blade. 7 feet wide blade handles even the toughest jobs. |
 |
HD Rubber Box Ends
The snowsport snowplow rubber box ends hold a large amount of snow and make snow plowing faster and more efficient. |
 |
HD Rubber Cutting Edge
Turf friendly heavy-duty rubber cutting edge and rubber box ends work great on cement, black top, gravel and won't damage grass surfaces. |
 |
Large Snow Capacity
The 7' blade comes with heavy duty rubber box ends so you can push lots of snow. |
 |
Lift Handles on Each Side
Comfortable lift handles are located on each side of the snowsport plow blade |
 |
Low Profile Design
The low profile design of SnowSport Personal Utility Plow allows full view of your vehicles' headlights while transporting or plowing. |
 |
No Interference w/Headlights
The low profile design of SnowSport Personal Utility Plow allows full view of your vehicles' headlights while transporting or plowing |
 |
Plow Drawing Detail
The snowsport is very easy to assemble |
 |
Plow Kit w/ Hitch
Snowsport Plow Blade, Push Frame & Receiver Hitch (Note: Hitch sold separately) |
 |
Push Frame
Fast attach push frame slides into 2" front or rear receiver hitch and secures with hitch pin. |
 |
Store w/Quick Pins to Transport
The SnowSport plow blade is easily lifted up and secured with snap pins on push frame for transporting. |
 |
Works Great on Grass
Plow blade is guided by push frame that allows it to slide up and down with the grade of the terrain. The thick rubber cutting edge moves snow but flexes over stationary objects. |
- How does the SnowSport Install to my vehicle? The SnowSport Utility Snow Plow attaches to a 2" front or rear receiver hitch. The push frame for the plow just hooks up like a ball mount. Note the hitch needs to be from 9" to 16" off the ground for ideal operation.
- Is a front or rear 2" x 2" receiver hitch needed? Yes: For 2" Front Receiver Hitchs we suggest you order the SnowSport Brand 2" Front Receiver Hitches. (Note: for Jeep & Ford F250+ SuperDuty applications, if you want to use a front mount - the SnowSport brand is required). For 2" Rear Receiver Hitchs, any 2" receiver hitch will work provided it is between 9" to 16" off of the ground.
- How difficult is it to assemble and install the snowsport snow plow? The Snowsport Blade and Push Frame are easy to assemble. Plan about 30-45 minutes depending on your mechanical skill.
- How difficult is it to install a front receiver hitch mount? The front end hitches are designed to bolt in place on most models - occasionally, certain models my require drilling. The instructions are clear cut. The front receiver hitch is mounted to the vehicle and the push frame is plugged into the front recevier hitch. The plow simply hangs on the push frame.
- Can I install the SnowSport Plow myself? YES, the instructions are clear cut. If you do need assistance, call 1-877-216-5446 or 701-253-5906. Our customers overwhelmingly say "it was simple and easy to install". The front hitch varies from vehicle to vehicle.
- How is the SnowSport Plow shipped? It is shipped via UPS/ Fed Ex Over Size 3 and sometimes it is also shipped via Common Carrier (Truck Freight) The blade is in one box, the push frame is in one box, and the angling interceptor is in another box. We select the best shipper possible depending on where you live and from which warehouse the Snowsport ships from.
- How easy is the SnowSport Plow to hook-up or un-hook between jobs? It's very easy. Just insert the push frame into the front receiver hitch and secure with pin. Then hang the blade one end at a time onto the push frame (can be done in less than a minute). Un hooking is just a easy. You can also leave the blade in the transport position on the push frame all winter long.
- How do you switch from transporting to plowing or from plowing to transporting? The operator must manually unhook the plow and lower it for plowing. For transporting simply lift the blade, one side at a time, onto the push frame. You can also leave the blade in the transport position on the push frame all winter long.
- How can the SnowSport Plow operate without hydraulics? The blade is secured by the push frame. As you push the snow, the blade travels up and down as needed by gravity pushing the snow with the rubber cutting edge and aluminum blade. The rubber cutting edge is designed to cut through the snow but pass over the harder ground surfaces below and be gentle on grass. When you back up, the blade automatically lays back, skimming over the surface. Then you drive forward and the blade re-engages for plowing.
- How well does the rubber cutting edge and box ends hold up? The rubber cutting edge is 1" thick 6" high - made of a hard rubber compound. This has been tested and proven to provide years of service. It can be replaced relatively inexpensively.
- What is the warranty? The plow has a 3-year limited warranty. See the owners manual for details.
- Can I move the SnowSport from one vehicle to another? Yes, the plow can be easily transfered to another vehicle, all you need is a front or rear receiver hitch installed on that vehicle.
- How do I know if the Snowsport Plow will work for my vehicle? The Snowsport Plow will work on virtually any compact or full size SUV or Pickup. All you need is a front or rear 2" receiver hitch. Please note we recommend for the front hitch you use the Snowsport Brand. If a front hitch is not available in the Snowsport Brand Front Receiver Hitch you can use a Rear 2" Hitch or Have a Hitch Shop Build you one. The 2" hitch just needs to be between 9" to 16" off the ground.
- How much does the plow weigh? The Aluminum blade is about 100 lbs. the Push Frame is about 65lbs and the Interceptor is: 20lbs Straight Interceptor & 35lbs for Angling Interceptor.
Associated DocumentsNote: Adobe Reader is required to view PDF documents: Download Adobe Reader
- Anodized 6063-T6 Aluminum Extruded Blade: Attractive heavy-duty and light weight clear anodized aluminum blade
- Low profile plow blade. 7' wide x 18" high x 3" thick: No lights needed or head light modification required for blade when plowing or in transport position.
- 3 Position Angling Interceptor: Adjust the plow for straight, right or left angles.
- Heavy Duty 1" thick Rubber Cutting Edge and 1" thick rubber box ends: Turf friendly heavy-duty rubber cutting edge. Works great on cement, black top, gravel and won't damage grass surfaces
- Plow Push Frame hooks into 2 inch Front or Rear Receiver Hitch. Note: Jeep & Ford F250+ SuperDuty Mounts must be Snowsport Brand Mounts for the Push Frame to work.
- Blade Weight: 100lbs Approx. Push Frame Weight: 65lbs Approx
- Note: If there is no front mount receiver hitch for your vehicle or if you prefer you can use the SnowSport snowplow with a 2" rear receiver hitch.
- Easy to Maintain - no electrical or hydraulic components to freeze, malfunction, or wear out
- Easy to Store - in between jobs or during off season - lightweight enough for easy one person handling.
- When not in use: The snowsport blade hangs easily on the push frame to transport.
Associated DocumentsNote: Adobe Reader is required to view PDF documents: Download Adobe Reader
 |
1. Just Drive Forward
Remember, when the snowsport plow you are not bothered by controls in the cab
|
 |
2. Let the Blade do the work
It will follow up and down the terrain while you drive. The blade has been specifically designed to roll the snow up and forward to maximize capacity.
|
 |
3. Stiff Rubber Cutting Edge
The heavy duty rubber cutting edge is rigid yet flexible, mike it turf friendly
|
 |
4. When Ready Just Back Up
With your vehicle in reverse the blade follows leaving the snow right where you piled it.
|
 |
Operation Step 1: Lower It
Lift one end of the blade at a time and lower over push frame.
|
 |
Operation Step 2: Plow It
Just drive and let the plow blade do the work
|
 |
Operation Step 3: Raise It
When completely done plowing, just lift one end of the blade at a time into the holders on top of the push frame which secure blade with quick pins. The you can transport to the next location.
|
SNOWSPORT PLOW MANUFACTURER’S LIMITED WARRANTY
Agri-Cover, Inc. extends the following limited warranty on its SNOWSPORT Plow to the original retail purchaser: Agri-Cover, Inc. warrants its SNOWSPORT Plow to be free from defects in material and workmanship under normal use for Three (3) years from date of purchase. ANY IMPLIED WARRANTY APPLICABLE TO THE SNOWSPORT PERSONAL UTILITY PLOW IS LIMITED IN DURATION TO ONE YEAR FROM THE DATE OF PURCHASE. Agri-Cover’s sole obligation under this warranty or any implied warranty is limited to the repair or replacement at its option, of defective parts only. No labor or service allowance is given or implied. IN NO EVENT SHALL AGRI-COVER, INC. BE LIABLE FOR INCIDENTAL, CONSEQUENTIAL, OR SPECIAL DAMAGES. Some states do not allow limitations on how long an implied warranty lasts or exclusions of incidental or consequential damages, so the above limitations and exclusions may not apply to you. To obtain part replacements under this warranty, contact the Customer Service Department of Agri-Cover, Inc. at the address shown below. Warranty registration must be on file and/or proof of original purchase (detailed and dated receipt) required for warranty to be effective. This warranty does not cover any failure due to abuse, misuse, alteration, neglect, improper assembly or installation, or improper maintenance.
This warranty gives you specific legal rights and you may have other rights which vary from state to state.
Agri-Cover, Inc.
Customer Service Dept.
Hwy. 281 N., PO Box 508
Jamestown, ND 58402Associated DocumentsNote: Adobe Reader is required to view PDF documents: Download Adobe Reader
| Customer Rating |
Product |
  |
AG-40006/AG-40672/AG-30604 - Snow Sport HD Personal Utility Snow plow (Blade & Push Frame)
Posted By: Heather S. (Allegany, NY) on 03/2008 I've used this plow for one winter and am overall very impressed with it. It handled a foot of snow pretty easily. The reason for four stars instead of five is that the push frame has quite a bit of rust on it after only one winter (and my truck is in the garage when I'm not driving it). The other thing is the price. I got mine through realtruck.com. It was a demo 6' version. I got it for about $600 (I think) including shipping. That's how much I would have spent on a decent snowblower to clear my drive. At that price, I think it's a great deal. The new 7' version is about $1300. If I would have had to spend that kind of money, I wouldn't have done it. Check out plowsite.com for some good pics and info on the Snowsport plow.
|
|
AG-40000/AG-40672/AG-30604 - Snow Sport HD Personal Utility Snowplow (Blade, Push Frame & Angle)
Posted By: John W. (New Ipswich, NH) on 03/2008 I have a long dirt driveway that has nearly ruined other expensive snow plows with metal blades. The Snow Sport has been great since it glides over the ruts/rocks and yet does an effective job in moving the snow. It's easy to operate and well worth the affordable price - especially in this snowy winter season!
|
|
AG-40000-USED/AG-40021-USED - Snow Sport HD Personal Utility Snow plow (Blade & Push Frame)
Posted By: Mark C. (Tijeras, NM) on 03/2008
|
|
AG-40000-USED/AG-40021-USED - Snow Sport HD Personal Utility Snow plow (Blade & Push Frame)
Posted By: Kevin B. (Norfolk, NY) on 03/2008 I have never been happier with a purchase. This plow works great. I wish I had some video footage of the amonut of snow I plowed this year, it is amazing how well it works. After a recent snow storm (10+ inches, 3 ft + drifts) I completed my driveway without getting stuck, while neighbors with a full size truck and plow were stuck more than once. I can remove or install the plow in less than a minute. It even works well with thick heavy snow. Great plow, great quality, great service.
|
|
AG-40000/AG-40672/AG-30604 - Snow Sport HD Personal Utility Snowplow (Blade, Push Frame & Angle)
Posted By: Daniel C. (Evergreen) on 03/2008 This is a fairly decent plow, for limited snow moving. I have a driveway in the mountains that extends about 120 feet uphill. I plow backwards up the driveway. It moves most snow - leaving about a 1/2 inch. Although, in places where the ground is not level, it leaves about anywhere between 1 and 3 inches.
I don't think this, or any plow, would work well unless you have 4 wheel drive. Snow tires (and studs) too, if you're plowing uphill.
It's about 65 pounds to lift the plow onto its hitch.
The entire plow device comes in a bunch of different pieces (more than you might think, from looking at the picture), so it takes about 3 hours to assemble.
Overall, it does what I expected it to do - a (relatively) cheap plow to move snow out of the driveway.
|
|
AG-40000/AG-40672/AG-30604 - Snow Sport HD Personal Utility Snowplow (Blade, Push Frame & Angle)
Posted By: Steven B. (Columbus, OH) on 03/2008 Was able to plow approx 15000 square foot parking lot of 20.5 inches of snow in about 15 minutes. Would have taken 6 or more hours with the 2 stage snow blower I have used for years
Did every thing the ad said it would and passed with flying colors
|
|
AG-40000/AG-40672/AG-30604 - Snow Sport HD Personal Utility Snowplow (Blade, Push Frame & Angle)
Posted By: Donald H. (Sandusky, OH) on 12/2007 great plow, easy to use and take on and off, doesn't tear up the ground
|
|
